Blower Purge Desiccant Dryer ZBB Eclipse™
150-8,000 SCFM
ZEKS ZBB Eclipse Blower Purge Dryers remove moisture from compressed air to achieve dew points to -40 °F. The ZBB provides its own source of regeneration air, permitting the full air compressor output to be available downstream.
Share
ZBB Blower Purge Desiccant Dryers use desiccant media in a twin-tower design and a process of heated desiccant regeneration delivered from an on-board blower to make available very dry air for critical applications. High performance switching valves alternate flow between the two towers for simultaneous drying and desiccant regeneration for a continuous supply of dry compressed air. Purge air flow is generated by the on-board blower and the temperature is raised by the dedicated heater, which enables use of the full compressor output downstream of the dryer. Dryer operation is automatically controlled by a reliable digital controller that provides connectivity for remote communications. .
19 Models, 150-8,000 SCFM
- NEMA 4 Electrical Enclosure w/ Digital Controller
- 7” Touchscreen
- High Performance Valves
- Stainless Steel Purge Valves - Position Indicator
- Tower Pressure and Temperature Gauges
- Failure to Shift Alarm
- Pressure Relief Valves
- Sound Attenuating Mufflers
- Incoloy Heaters
- High Efficiency Blowers
- Downstream Purge
- Blue Moisture Indicator
- Control Air Filtration and Pressure Regulation
- High Strength Activated Alumina Desiccant
- ASME Coded Towers
- Removable Stainless Steel Diffuser Screens Accessible Fill and Drain Ports
150-8,000 SCFM
Eclipse™ ZBB Series Heated Blower Regeneration
For air systems with 30-2,000 horsepower compressors
Learn More
150-8,000 SCFM
Eclipse™ ZHA Series Heated Blower Regeneration
For air systems with 30-2,000 horsepower compressors
Learn More
3-177 SCFM
ZMA Modular Series Heatless Regeneration
For air systems with 1-35 horsepower compressors
Learn More
20-60 SCFM
Hydronix™ MPS Series Heatless Regeneration
For air systems with 5-15 horsepower compressors
Learn More
90-5,000 SCFM
Eclipse™ ZPB Series Heatless Regeneration
For air systems with 20-1,000 horsepower compressors
Learn More
Product Information
ZBB Blower Purge Desiccant Dryers use desiccant media in a twin-tower design and a process of heated desiccant regeneration delivered from an on-board blower to make available very dry air for critical applications. High performance switching valves alternate flow between the two towers for simultaneous drying and desiccant regeneration for a continuous supply of dry compressed air. Purge air flow is generated by the on-board blower and the temperature is raised by the dedicated heater, which enables use of the full compressor output downstream of the dryer. Dryer operation is automatically controlled by a reliable digital controller that provides connectivity for remote communications. .
19 Models, 150-8,000 SCFM
Features
- NEMA 4 Electrical Enclosure w/ Digital Controller
- 7” Touchscreen
- High Performance Valves
- Stainless Steel Purge Valves - Position Indicator
- Tower Pressure and Temperature Gauges
- Failure to Shift Alarm
- Pressure Relief Valves
- Sound Attenuating Mufflers
- Incoloy Heaters
- High Efficiency Blowers
- Downstream Purge
- Blue Moisture Indicator
- Control Air Filtration and Pressure Regulation
- High Strength Activated Alumina Desiccant
- ASME Coded Towers
- Removable Stainless Steel Diffuser Screens Accessible Fill and Drain Ports
Downloads
Related Products
150-8,000 SCFM
Eclipse™ ZBB Series Heated Blower Regeneration
For air systems with 30-2,000 horsepower compressors
Learn More
150-8,000 SCFM
Eclipse™ ZHA Series Heated Blower Regeneration
For air systems with 30-2,000 horsepower compressors
Learn More
3-177 SCFM
ZMA Modular Series Heatless Regeneration
For air systems with 1-35 horsepower compressors
Learn More
20-60 SCFM
Hydronix™ MPS Series Heatless Regeneration
For air systems with 5-15 horsepower compressors
Learn More
90-5,000 SCFM
Eclipse™ ZPB Series Heatless Regeneration
For air systems with 20-1,000 horsepower compressors
Learn More